Designed to enable the addition of an en-suite shower room, Sanipro will take the waste from a WC, shower cubicle and wash basin and pump it quickly and quietly through 22mm small bore pipework to a remote soil stack or sewer.
Sanipro has also recently received the 'silent' makeover and been fitted with an integrated carbon filter in its elegant new casing.
Sanipro is easy and economical to install, works with any style of sanitaryware and can be concealed behind a demountable panel to give access if required.
WC
Washbasin
Shower
Power shower
Hydromassage
Bidet
| Motor |
induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles. |
| Watts (Consumption) |
400w |
| Electrical Supply |
220-240V 50Hz |
| Flow rate at max head l/min |
55 |
| Horizontal Discharge |
100 metres |
| Vertical Discharge |
5 metres |
| Gravity fall on horizontal installations |
1/200 |
| Discharge Pipe Diameter |
22mm |
| Materials |
Polypropylene, C.R.P., stainless steel, Neoprene |
| Type of WC Pan (not included) |
Short spigot 100mm HO outlet (BS EN 33/37) |
| Motor RPM |
2800 RPM |
| Normal Running Time WC |
10–20 secs approx or as required, to discharge shower etc |
| Dimensions (vertical height is measured from floor level) |
413W x 305 O/H x 200D (requires 210mm behind spigot) |
| Technote |
Designed to fit BS EN 33/37 WC pans. As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall |
